...................
.....
DC Motor Control In this project design from Microcontroller MCS-51 family AT9C1051 for control . AT24C01A is Memory EEPROM use system bus I2C
Feature :
- Can control DC Motor for 5Volt to 100 Volt
- Speed Display by 7Segment 2 digit
- Save last Data of Speed setup by EEPROM
- Can Speed Adjust from 0-50Step
- Direction Select Mode
Hardware
The Completed circuit show in figure 1 . Output signal from P3.5 for drive motor type of PWM ,P3.2 connect with Relay for change Direction of motor . AT24C01A is IC EEPROM for save Data of speed . In section display use 7 Segmen for speed display.
